Jump Starter PROPULSTATION® 24V-1200CA

Jump Starter Propulstation 24V-1200CA

Download the brochure

 Vehicle 24V
Gasoline vert
Diesel vert
Type of recovery
24V vehicles: INTENSIVE
Laborious starts, recovery of a vehicle with completely flat battery
Successive jump starts, several times during the day
Jump start of vehicles' fleets
Difficult conditions of use*

* Extreme conditions of use such as frost, extreme heat…

Type of vehicles to be jump started
 Heavy civil engineering equipment
 New and second-hand truck
 New and second-hand bus and coach
 Leisure plane, propeller
 Leisure boat
The correct use of a Ceteor Booster cannot cause any damage to the electronic of a vehicle..

Ceteor booster packs are perfectly compatible with hybrid vehicles.

Diesel motors up to*:
Power in HP
100 250 500 1000 1500
carre-2 carre-2 carre-2 carre-1 carre-1
* Petrol motors are easier to start

carre-1  Normal
carre-2  Intensive

icone-ceteor Following the principle "who can do more can do less" our most powerful battery boosters can also be convenient for the applications covered by less powerful battery boosters with same voltage of our range.

Caution :
The circumstances/conditions when starting a vehicle depend of various parameters: vehicle’s condition, engine type (petrol or diesel) and power, presence of battery in vehicle or not, temperature, frequency of use ... Those influence the jump start’s facility.  Chart for your information - Manufacturer’s advice.

Technical specifications
Reference 520005
Voltage 24V
Cranking Amps 1200 A
Peak Amps 3100 A
Nr of batteries 2
Starting cable length 1,35 m
Starting cable diameter 50 mm²
Type of clamps 850 A
Clamps length 215 mm
Clamps opening 54 mm
Reverse polarity signal vert
Internal fuse 500 A
Connector for auxiliary cables vert
Net weight 25,7 kg
Dimensions (cm) 49 x 19 x 50
Gross weight 26,95 kg
vert   Oui   

rouge   Non   

jaune   En option   

bleu   Sur demande

Choice of station type
12-24V-Station-AC AC
AC - for workshop: is provided with an AC/DC 230V/12V charger to connect on the mains.
12-24V-Station-DC DC
DC – The vehicle station must be connected to the recovery vehicle’s battery by the DC/DC 12V/12V (or 24V/24V) lead. The station is equipped with a one-way diode that prevents the breakdown vehicle from discharging the booster.

logo-docking-station 5 Assets :

Always in the right place
2. Always 100% charged
3. 100% successful starts
4. times longer lifetime
5. Absolute pleasure of use

Standard equipment
The blue clamp is equipped with a led (lamp) for an easier and safer use, especially in the dark.
This booster is equipped as a standard with a switch and a reverse polarity signal to improve security during use. The switch is made of a red tension selector, which can be used to plug in specific auxiliary cables with NATO, Park plug, etc.

Join us on Facebook !    Join us on Youtube !

Distributor area

Site updated on 2018-11-15