PROPULSTATION® 12V range

Range of Battery Boosters PROPULSTATION 12V 

The battery boosters PROPULSTATION® are equipped with an integrated charging station. It allows maintaining the booster perfectly charged at all time and is available in 2 versions: one for workshops and the second for recovery service vehicles.

They are dedicated for occasional to intensive uses on 12V vehicles and ideal for recovery services, garages, workshops and second-hand vehicle shop.

Download technical sheet of the range


Gamme-PPS-12

 

 

Comparative

Diesel motors up to* :

Model Power in HP
   12V
<125 150 175 250 300 350 500
PPS 12V-800CA carre-2 carre-2 carre-1 carre-1      
PPS 12V-1200CA carre-2 carre-2 carre-2 carre-2 carre-1 carre-1  

* Petrol motors are easier to start

Legend :

carre-1 Normal
carre-2 Intensive


Caution :
The circumstances/conditions when starting a vehicle depend of various parameters: vehicle’s condition, engine type (petrol or diesel) and power, presence of battery in vehicle or not, temperature, frequency of use ... Those influence the jump start’s facility.

Chart for your information - Manufacturer’s advice.

Technical sheet

   Models
PPS 12V-800CA PPS 12V-1200CA
 Reference 521002 520003
Voltage 12V 12V
Cranking Amps 800 A 1200 A
Peak Amps 2370 A 3100 A
Nr of batteries 1 1
Starting cable length 1,55 m 1,55 m
Starting cable diameter 35 mm² 50 mm²
Type of clamps 650 A 850 A
Clamps length 190 mm 215 mm
Clamps opening 35 mm 54 mm
12V Output 16 A 16 A
Reverse polarity signal jaune jaune
Internal fusee 300 A 300 A
Connector for auxiliary cables jaune jaune
Net weight 12,3 kg 15,6 kg
Dimensions (cm) 45 x 13 x 39 45 x 13 x 39
Gross weight 14,5 kg 16,5 kg
Packing dimensions (cm) 45 x 16 x 52 45 x 16 x 52

 

vert   Yes   
rouge   No   
jaune   Option   
bleu   Upon request

Options

Auxiliary connector for the vehicle Auxiliary connector for vehicle Auxiliary connector for the vehicle
Fit a connector on all your vehicles and machines to make their batteries accessible at any time; essential for fleets of vehicles which regularly require restarting.
860039 Auxiliary connector for vehicle 
External 12V compressor for battery booster 12 V – 8.3 bar compressor - External External 12V compressor for battery booster
External compressor to be connected to the lighter socket, available for all 12 V and 12/24 V boosters
860012A   
Easy-Grip cable Micro - Adapter Easy Grip Easy-Grip cable Micro - Adapter
To make access to the smallest battery terminals easier and serve as an adaptor.
860055 50 cm cable with a F600 clamp and a Moto clamp 
860056 50 cm cable with a F650 clamp and a F600 clamp 
Jumpstarter - aviation version AVIO version
For applications in the aviation sector, we can supply all our booster models in an "AVIO" version. In this case they do not have cables and clamps but are equipped with an auxiliary connector permitting connection of the 2 m external jump cable with "Aviation" plug with 3 contacts or any other cable of your choice, as an option.
Switch and Buzzer - Reverse polarity signal - Propulstation Switch and buzzer for Propulstation
The switch acts as a contact breaker. When it is disconnected, it cuts off the current to the clamps so that they can be positioned on the vehicle safely before the booster is switched on, so avoiding short circuits. The buzzer signals any inversion of polarity and operates when the switch is disconnected.

This function is standard on the 12/24  V and 24  V models. In this case, it is the voltage selector which serves as a switch/contact breaker.
860019 Switch and buzzer for Propulstation
Auxiliary red connector for portable booster Auxiliary connector for portable booster Auxiliary red connector for portable booster
Auxiliary cables with special connectors permit safer connection and improved passage of the current for even more efficient starting.
They must be connected to the booster's auxiliary connector. The 24 V models are equipped with this connector as standard./td>
860014 Auxiliary connector for portable booster 
Double wrap cable for portable booster Double tour
To increase the length of your booster's cables.
860021 2.25 m cables instead of 1.35 m for Propulstation 12V

Auxiliary cables

picto-info Auxiliary cables with special connectors permit safer connection and improved passage of the current for even more efficient starting.

They must be connected to the booster's auxiliary connector.

 

Auxiliary red connector for portable booster Cable with auxiliary connectors at both ends Auxiliary red connector for portable booster
Use this special cable to connect the Booster to vehicles and machines fitted with a vehicle auxiliary connector.
860037 Câble de 2m x 50mm²
860043 4 m x 50 mm² cable 
Cable with 850A clamps - 3m x 50mm² cable with 850 A clamps Cable with 850A clamps - 3m x 50mm²
3 m x 50 mm² cable with 850 A clamps
860016 3 m x 50 mm² cable with 850 A clamps  
Aviation cable - 2m x 50mm² Aviation cable Aviation cable - 2m x 50mm²
2 m x 50 mm² jump cable fitted with a NATO aviation plug with 3 contacts for connection to aircraft or helicopters of 12 V, 24 V or with 28 V turbine.
976001 Aviation cable - 2 m x 50 mm² 

Join us on Facebook !    Join us on Youtube !


Distributor area

Site updated on 2018-11-15